U-CONNECT EUROPE
   
 
Home   Power Plugs Power Coolers Contact Us About Us
 

Jeep Cherokee 2.7 CRD
Dastek Power Plug | Uhi Chip Performance | ECU Tuning Chips

Power & Torque Gains
Jeep Cherokee 2.7 CRD Power | ECU tuning chips | Uni chip
 
Jeep Cherokee 2.8 CRD
Power & Torque Gains
 
 
 
TORQUE INCREASE
BEFORE AFTER
400 Nm 480 Nm
 
POWER INCREASE
BEFORE AFTER
120 kW 152 kW
Contact Dastek for more info on the Power Plug for your Jeep Cherokee 2.7 CRD
The Jeep Cherokee 2.7 CRD & Uni chip Performance Chips
The pre-programmed Power Plug simply plugs into the vehicles standard ECU!
How It Works
The Power Plug is not to be confused with the mostly, overseas sourced and local condition non-specific, performance tuning chips and re-flash method of tuning that most performance enthusiasts seem familiar with in which the OEM ECU code is simply generically re-written with a hand held programmer via the vehicle’s OBD port. With the Power Plug / Uni chip, all the changes occur within this unit and are electrically communicated to your vehicle’s engine control system. No changes are made within the OEM computer, and thus all the engine safety parameters as set by the manufacturer remain in place.
This is exceptionally important, especially when taking into account the tough, local, South African conditions, such as high altitude, long distances, high speeds, high temperatures and the various qualities of diesel. And once the Power Plug is installed, it leaves no electronic “footprint”, and this also applies should you want to remove the unit, unlike when you program the OEM ECU with a re-flash programmer, the ECU knows and records that it has been reprogrammed. Even if you re-flash your OEM back to stock prior to service work, the OEM ECU dutifully reports how many times it has been re-flashed whenever the dealer checks via their diagnostic equipment, and if it reports something different than what the dealer’s records reflect, some difficult questions could arise.
Installation
The Power Plug comes as a complete stand-alone product, complete with a wiring harness that plugs directly into the OEM ECU via connectors that are perfectly matched to the factory connectors on your vehicle. There is no dangerous or complicated cutting into of wires on your vehicles existing main wiring harness and there is also no room for errors by wiring the wrong wires together. From start to finish, most installation times are less than five minutes (depending on the options you choose) and everything stays as is in your vehicle. No extended and inconvenient vehicle down time, no long hours spent on the dyna, and no stripping and modifying of parts. As already mentioned, the Power Plug is completely removable, and this means that you can choose to remove the unit from your vehicle when you want to sell it or you can transfer it to another vehicle of the same model type should you upgrade your vehicles.
Tuning Options
The basic Power Plug kit includes a two-position switch via which you can change between a standard map and the upgraded map. But you can also opt for the more flexible multi-map Bluetooth version, that sees you being able to choose from up to five different map settings for your vehicle via your cell phone. So now you can have an everyday traffic map, a map for towing, a map for open road performance but to name a few of the options that can be tailor made for whatever motoring requirement you might have.
Click Here to contact Dastek for more information on the Power Plug for your vehicle
Top of Page About Us Power Plug Power Cooler Resources Contact Us Home
Copyright © Dastek Power
Privacy Policy
U-CONNECT EUROPE
* All manufacturer's names, numbers, symbols & descriptions are for reference purposes only.
It is not implied that any part, conversion or modification is the product of these manufacturers.
* All Test Figures displayed on this website were obtained at Highveld altitude. These figures may differ from vehicle to vehicle.
The power figures have been corrected back to flywheel power.